Wireless Network Troubleshooting; Wireless Setup Problems - Oce VL3200x User Manual

Wireless network troubleshooting

Wireless setup problems

The Océ print server is not found during setup by the Wireless Device Setup Wizard.
a
Make sure that the machine is powered on, is on-line and ready to print.
b
Move your machine closer to your access point/router (or your computer for Ad-hoc) and try again.
c
Reset the print server back to its default factory settings and try again. (For the information how to reset
to the factory default settings, see Restoring the network settings to factory default on page 119.)
Why do I have to change my machine's network setting to "Wired LAN" during setup although I am
trying to setup Wireless LAN?
If you are using Windows
network using a network cable, it is recommended you temporarily connect the machine to your
access point/router, hub or router using a network cable. You will also need to change your machine's
network setting to wired LAN temporarily. Your machine's network setting will be changed to wireless LAN
automatically during the course of the setup.
®
Windows :
Using the Setup Wizard from the control panel on page 28
Wireless configuration for Windows
Macintosh:
Using the Setup Wizard from the control panel on page 28
Wireless configuration for Macintosh using the Océ installer application on page 63
®
2000, Mac OS X 10.3.9 or greater or your computer is connected to the wireless
®
using the Océ installer application on page 36
Troubleshooting
14
14
14
14
14
197