Table of Contents
Advertisement
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know
this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value
that must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
3
Encryption key, WEP key, Passphrase. For LEAP and EAP-FAST, record the Name and Password.
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Infrastructure
b
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
c
Press Menu on the control panel of the machine.
d
Press a or b to choose Network.
Press OK.
e
Press a or b to choose WLAN.
Press OK.
f
Press a or b to choose Setup Wizard.
Press OK.
g
If the following message appears, press a or b to choose On and press OK. The wired network interface
will become inactive with this setting.
72.WLAN
WLAN Enable ?
a
On
Off
b
Select ab or OK
Uses 5 text characters e.g. "Hello" (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. "71f2234aba"
Uses 13 text characters e.g.
"Wirelesscomms" (this is case sensitive)
Uses 26 digits of hexadecimal data
e.g."71f2234ab56cd709e5412aa3ba"
Authentication method
Pre-Shared Key (WPA2-PSK) AES
Configuring your machine for a wireless network
Encryption mode
Network key
12345678
3
3
29
Advertisement
Table of Contents
Troubleshooting
