Oce VL3200x User Manual page 86

LCD messages when using the SES/WPS/AOSS™ control panel menu
LCD shows
Setting WLAN
Connecting SES
Connecting WPS
Connecting AOSS
Connected
Connection Error
No Access Point
Connection Fail
m
Click Next.
Connection status
Searching or accessing the access
point, and downloading settings from the
access point.
Connecting the access point.
Connection succeeded.
Session overlap has been detected.
The access point detection failed.
Connection failed.
Wireless configuration for Macintosh using the Océ installer application
Check that only one router or access point has
the automatic wireless setup
(SecureEasySetup™, AOSS™, etc.) mode
enabled and try starting from step i again.
Move the machine closer to your access
point/router and try starting from step i again.
1 Try starting from step i again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
Action
—
—
—
5
5
76