Oce VL3200x User Manual page 203

d
Verify that the print server is on your network as follows:
®
Windows
Try pinging the print server from the host operating system command prompt with the command:
Click Start, All Programs
1
Programs for Windows
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
Mac OS X 10.3.9 or greater
1
From the Go menu, choose Applications.
2
Open the Utilities folder.
3
Double click the Terminal icon.
4
Try pinging the print server from the Terminal window:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to
two minutes for the print server to load its IP address after setting the IP address).
e
If you have tried step a to step d above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. (For information on how to reset to the default
factory settings, see Restoring the network settings to factory default on page 119.)
f ®
(Windows )
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and re-
install the drivers. (For how to disable the Firewall, see General problems on page 190.) If you are using
personal Firewall software, see the user's guide for your software or contact the software manufacturer.
1
, Accessories then choose Command Prompt.
®
2000 users
Troubleshooting
14
193