Table of Contents
Advertisement
6
6.6
05 Network Setting
6.6.1
01 Machine NIC Setting
Control the NIC settings such as the IP address and line speed of the machine.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [05 Network Setting], and then [01 Machine NIC Setting].
The Machine NIC Setting Screen will be displayed.
3
Specify the following items.
–
Enter numeric values using the touch panel keypad. After entering a value, touch Set. The next item
becomes highlighted for setting. Continue in this manner.
IP Address: Enter the IP address of the machine.
Subnet Mask: Enter the subnet mask.
Gateway Address: Enter the gateway address.
DNS Server 1/DNS Server 2: To specify the mail server by the host name, enter the IP address of
the DNS server to DNS Server 1 or 2. When using two DNS servers, enter the IP address to both of
them.
To enable this setting change of the DNS server, the main body needs to be rebooted. Touch [OK],
and turn off then on the sub power switch.
Line Speed Setting: Specify the line speed of the network. Choose from the options provided.
4
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Network Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
6-82
Machine administrator setting
CS655 Pro
Advertisement
Table of Contents
