The Rear Ports - Billion BiPAC 8200N User Manual

The Rear Ports

Port
1 DSL
2 Ethernet
3 WPS
4 Reset
5 Power
6 Power Switch
7 Antenna
Connect this port to the VDSL/telephone network with the RJ-11 cable
(telephone) provided.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN
ports when connecting to a PC or an office/home network of 10Mbps or
100Mbps.
Note: Only Ethernet port 4 can be used for EWAN.
Push this button to trigger Wi-Fi Protected Setup function.
Press this button for more than 1 second to restore the device to its
default mode.
Connect it with the supplied power adapter.
Power ON/OFF switch.
Connect the detachable antenna to this port.
Meaning
8