Billion BiPAC 8200N User Manual page 12

Recovery Operation
1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash):
The system will check the firmware of this device automatically while turning on the modem. Once
the firmware is not integrated, the system enters the recovery state. The modem emergency-
reflash web interface will then be accessible via http://192.168.1.254 where you can upload a
firmware image to restore the modem to a functional state. Please note that the modem will only
respond via its web interface at this address, and will not respond to ping requests from your PC
or to telnet connections.
2. Recovery procedures for a lost web interface password:
After turning the router on, please press the Reset Button on the back of the modem, and hold
the button until all the lights on the modem begin to flash and then it will reboot itself to restore the
factory default settings. The login username and password will then be reset to admin. You can
then access its GUI via its default IP address at http://192.168.1.254/.
9