Table of Contents
Advertisement
Wireless
Parameters
WLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable.
Mode: The default setting is 802.11g+n. If you do not know or have both 11g and 11b devices in
your network, then keep the default in mixed mode. From the drop-down manual, you can select
802.11g if you have only 11g card. If you have only 11b card, then select 802.11b. And if you have
11n card, you can select 802.11n.
Number of Active SSID: You can select 1, 2, or 4 SSIDs to be available at the same time.
SSID No.: The selection of SSIDs will depend on the Number of Active SSID. Select each SSID,
ranging from SSID1, SSID2, SSID3 and SSID4 and set their individual configurations.
55
- Quick Links:
- Vdsl Status
Hide quick links:
Advertisement
Table of Contents
