Billion BiPAC 8200N User Manual page 82

Fixed IP Address (EWAN)
A Static WAN connection will be configured according to the IP properties defined by your ISP.
Line Speed: Set the downstream and upstream of your connection in kilobytes per second. The
connection speed is used by QoS settings.
Protocol: Select the protocol you will use in the device.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single IP account by sharing the single IP address. If users on your LAN have their own
public IP addresses to access the Internet, NAT function can be disabled.
IP Address: Enter your fixed IP address. Each IP address entered in the field must be in the
appropriate IP form, which is four IP octets separated by a dot (x.x.x.x). The Router will not accept
the IP address if it is not in this format.
Netmask: User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given)
Gateway: Enter the IP address of the default gateway (if given).
Obtain DNS: Select this check box to activate DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
MAC Spoofing: This option is required by some service providers. You must fill the MAC address
specified by your service provider when this information is required. It will temporarily change
your router's MAC address to the one you have specified in this field. The default setting is set to
disable.
Click Apply to confirm the settings.
79