Device Description; The Front Leds - Billion BiPAC 8200N User Manual

Device Description

The Front LEDs

LED
1 Power
Ethernet port
2
1X —
(RJ-45 connector)
3 Wireless
4 WPS
5 DSL
6
Internet
Lit red when the device is booting.
Lit green when the system is ready.
Flashes when the system is rebooting or firmware upgrading.
Lit when one of LAN ports is connected to an Ethernet device.
Lit green when the speed of transmission hits 100Mbps; Lit orange
4X
when the speed of transmission hits 10Mbps.
Blinking when data is transmitted/received.
Lit green when a wireless connection is established.
Blinking when data is transmitted/received.
Lit green when a wireless connection is established.
Blinking when WPS configuration is in progress.
Lit green when the device is successfully connected to an VDSL
DSLAM. ("line sync")
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection
absent.
Meaning
7