Cabling - Billion BiPAC 8200N User Manual

Cabling

One of the most common causes of problems is because of bad cabling or VDSL line(s). Make
sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify
that the LAN Link and VDSL line LEDs are lit. If they are not, verify that you are using the proper
cables.
Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analog modems) have a line filter connected between them and the
wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified and
licensed electrician), and that all line filters are correctly installed in a right way. If line filter is not
installed and connected properly, it may cause problem to your VDSL connection or may result in
frequent disconnections.
10