The Rear Ports - Billion BiPAC 7300N User Manual

2.4 The Rear Ports

Port
1 Power
2 Reset
WPS (Only
3 available
for 7300N)
Ethernet
4
5 DSL
Antenna
(Only
6
available for
7300N)
6 5 6
Description
Connect the supplied power adapter to this jack.
After the router is powered on, press this reset button using the
end of paper clip or other small pointed object to reset the router
and to restore it to factory default settings.
1. Recovery procedures for non-working routers (e.g. after a
failed firmware upgrade flash).
2. Recovery procedures for a lost web interface password:
Push WPS button to trigger Wi-Fi Protected Setup function.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Note: Only Ethernet port 1 can be used for EWAN.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Connect the detachable antenna to this port.
4
10
2 1 6
3