Factory Default Settings - Billion BiPAC 7300N User Manual

802.11n adsl2+ firewall router
Hide thumbs Also See for BiPAC 7300N:
Table of Contents

Advertisement

3.2 Factory Default Settings

Before configuring the BiPAC 7300(N) router, you need to know the following default
settings.
Web Interface: (Username and Password)
Username: admin
Password: admin
The default username and password are "admin" and "admin" respectively.
If you ever forget the username/password to login to the router, you
may press the RESET button up to 6 seconds then release it to restore
the factory default settings.
Caution: After pressing the RESET button for more than 6 seconds then release it, to
Attention
Attention
be sure you power cycle the device again.
LAN Device IP Settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP Server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bipac 7300

Table of Contents