Billion BiPAC 7300N User Manual page 103

Priority: Specify the priority for the bandwidth that is not used. For examples, you may
specify two different QoS policies for different applications. Both applications need a minimal
bandwidth and need more bandwidth, beside the assigned one, if there is any
available/non-used one available. So, you may specify which application can have higher
priority to acquire the non-used bandwidth.
High
Normal: The default is normal priority.
Low
For the sample priority assignment for different policies, it is served in a First-In-First-Out
way.
Internal IP Address: The IP address values for Local LAN machines you want to control.
(For IP packets from LAN to WAN, it is the source IP address. For IP packages from WAN to
LAN, it is the destination IP address.)
Internal Port: The Application port values for local LAN machines you want to control.
(For TCP/UDP packets from LAN to WAN, it is the source port value. For TCP/UDP packets
from WAN to LAN, it is the destination port value.)
External IP Address: The IP address values for Remote WAN machines you want to
control. (For IP packets from LAN to WAN, it is the destination IP address. For IP packages
from WAN to LAN, it is the source IP address.)
External Ports: The Application port values for remote machines you want to control.
(For TCP/UDP packets from LAN to WAN, it is the destination port value. For TCP/UDP
packets from WAN to LAN, it is the source port value.)
Time Schedule: Scheduling your prioritization policy.
100