Lan And Wan Port Addresses; Information From Your Isp - Billion BiPAC 7300N User Manual

3.3 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are preset at the factory. The default values are
shown below.
LAN Port
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs

3.4 Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of services are provided, such as PPPoE, PPPoA, MPoA or Pure Bridge.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoA
RFC1483 Bridged
RFC1483 Routed
192.168.1.254
255.255.255.0
Enabled in ports 1, 2, 3 and 4
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
VPI/VCI, VC-based/LLC-based multiplexing, Username, Password,
Service Name, and Domain Name System (DNS) IP address (it can be
automatically assigned by your ISP when you connect or be set
manually).
VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, and
Domain Name System (DNS) IP address (it can be automatically
assigned by your ISP when you connect or be set manually).
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it is
fixed IP address).
WAN Port
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
23