Default Used WEP Key: Select the encryption key ID; please refer to Key (1~4) below.
Passphrase: This is used to generate WEP keys automatically based upon the input
string and a pre-defined algorithm in WEP64 or WEP128.
Key (1-4): Enter the key to encrypt wireless data. To allow encrypted data transmission,
the WEP Encryption Key values on all wireless stations must be the same as the router.
There are four keys for your selection. The input format can be either HEX style or ASCII
format, 10 and 26 HEX codes or 5 and 13 ASCII codes are required for WEP64 and
WEP128 respectively.
Click Apply to confirm the settings.
Note: For information about settling Radius/802.1x, please refer to WLAN setup section.
57