Billion BiPAC 7300N User Manual page 14

The detail instruction in Reset Button
1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash):
Hold the Reset Button on the back of the modem in. Keep this button held in and turn on the
modem. Once the lights on the modem have stopped flashing, release the Reset Button.
The modem's emergency-reflash
http://192.168.1.254
functional state. Please note that the modem will only respond via its web interface at this
address, and will not respond to ping requests from your PC or to telnet connections.
Before powering on the router to enter the recovery process, please
configure the IP address of the PC as
following step by step guide.
1. Power the router off.
2. Hold the "Reset Button".
3. Power on the router. Then Router's IP will reset to Emergency IP
address (Say 192.168.1.254)
4. Download the firmware.
where you can upload a firmware image to restore the modem to a
web interface will
192.168.1.100
11
then be accessible
and proceed with the
via