Cabling An Accessible 5 1/4-Inch Device - NEC Direction SP User Manual

T
Align the cable connector to the matching pins on the
drive.
Locate an available power connector coming from the
2.
power supply.
Connect the appropriate power cable to the power
3.
connector on the device.
If you are installing an IDE CD-ROM drive, also
4.
connect the audio cable (see the instructions that came
with the drive).

Cabling an Accessible 5 1/4-Inch Device

Connect the diskette drive signal cable connector to the
1.
appropriate connector on the device as shown in the
following figure.
2. Locate an available power connector.
Connecting device cables
Installing Options 5-23