Table of Contents
Advertisement
T
Slide the device into the slot and secure the device.
7.
Connect the device cables (See "Cabling Storage
Devices").
8.
Replace the front panel (see "Replacing the Front
Panel").
9.
Replace the access cover (see "Replacing the Access
Cover").
Installing a 5 1/4-Inch Device
Install an accessible device into the device slot as follows.
1.
Follow the preinstallation instructions that came with the
device, such as setting jumpers and switches.
NOTE
rails, do not attach them. Remove any rails
attached. See the documentation that comes with
the device.
2.
Remove the access cover (see "Removing the Access
Cover").
3.
Remove the device cage (see "Removing the
CD-ROM/DVD Drive").
4.
Remove and label any cables that interfere with
installing the device.
5.
Remove the front panel (see "Removing the Front
Panel").
Remove the plastic blank panel. If you are installing a
6.
hard drive, keep the panel handy.
5-32 Installing Options
If your 5 1/4-inch device comes with drive
Advertisement
Table of Contents
