Cabling An Accessible 5 1/4-Inch Device - NEC PowerMate SPB-Boston User Manual

If you are installing an IDE CD-ROM reader, also
4.
connect the audio cable (see the instructions that came
with the reader).

Cabling an Accessible 5 1/4-Inch Device

Connect the diskette drive signal cable connector to the
1.
appropriate connector on the device as shown in the
following figure.
2. Locate an available power connector.
Connect the power cable to the power connector on the
3.
device.
5-26 Installing Options
Connecting an accessible 5 1/4-inch device