Table of Contents
Advertisement
4.
Carefully pull the battery upward until there is sufficient
space to slide the battery out of the socket. You can lift
the battery with a plastic screwdriver or orange wood
stick; however, be careful to avoid scratching the system
board.
Remove the battery and discard in accordance with the
5.
manufacturer's instructions.
With the positive (+) side facing up, slide the new
6.
battery into the socket.
Replace any removed expansion boards.
7.
Replace the system access cover.
8.
Connect external peripherals and power cables
9.
Run the Setup Utility to reconfigure your system
10.
parameters (see Chapter 4).
8-12 If You Have a Problem
Locating the battery
Advertisement
Table of Contents
