Table of Contents
Advertisement
Enter the Setup utility by pressing
1.
following bootup message appears.
The Main menu appears. Use your right arrow key to
2.
select the Power menu. The Power Management option
is factory set to "Enabled."
Press
3.
box appears.
4.
Follow the on-screen prompts to change the options.
You can set the Inactivity Timer for up to a 16-minute
delay.
5.
Use the up and right arrow keys to select Exit.
6.
Select "Exit Saving Changes." Press
At the prompt, to confirm exiting setup, press
7.
Exit the Setup utility.
NOTE
computer has entered power-saving mode, just
move your mouse or press a key, and your
computer is active again.
Protecting Your System
Your system's security features provide protection against
unauthorized access to your system and data. This
protection includes a user and administrator password.
Dual password security provides two levels of password
security. An "Administrator password" allows access to the
system's Setup utility for system configuration. A "User
password" allows system bootup only after the entry of a
password.
Press <F2> to enter SETUP
to select Power Management. A submenu
Enter
When you want to resume work after your
when the
F2
Enter
.
.
Enter
Using Your Computer 2-9
Advertisement
Table of Contents
