Set Skip Over Perforation; Cancel Skip Over Perforation; Character Style And Text Mode Functions - Intermec 6820 User Manual

Character Style and Text Mode Functions

6820 Series 80-Column Printer User Manual

Set Skip Over Perforation

Defines the number of lines to skip between the last printed line on
the page and the first printed line on the next page is set. If the value
specified for this function is greater than the page length, it is
ignored. This function is canceled by using one of the Set Page Length
functions (factory default = disabled). This function is valid for
continuous paper only.
The amount of blank space at the bottom of the printed page depends
on the Line Spacing.
Format
Decimal
27 78 n

Cancel Skip Over Perforation

Cancels the skip over perforation, which allows the maximum
number of lines to print on each page.
Format
Decimal
27 79
The following set of functions affect the appearance of text on the
printed page. This could involve size, typeface, or other characteristics
of the text.
Chapter 4 — Control Code Definitions
Hex
1B 4E n
Hex
1B 4F
ASCII
ESC "N" n
ASCII
ESC "O"
45