Connecting To The Printer; Understanding The Font Modules - Intermec 6820 User Manual

Chapter 3 — Configuring the 6820 Printer

Connecting to the Printer

Disconnect this terminal holder
ribbon cable from the floor of
the printer cavity

Understanding the Font Modules

18
Connect your printer to your desktop PC using a serial cable
(P/N 226-270-xxx). The serial COM port connector on either the fixed
mount printer or portable printer is on your printer mechanism, the
same side as the green thumbwheel and next to the reset switch.
Before connecting to your PC, locate and disconnect the gray terminal
holder ribbon cable connector from the floor of the printer cavity.
The cable is located behind the printer mechanism on the same side as
the green thumbwheel and is the one that is not attached to the
printer mechanism.
For more information on using your printer with your desktop PC,
see "Using the Printer Configuration Utility" on page
Intermec provides the following font modules for your 6820:
• nft00000.mod — Default International
• nft00437.mod — IBM/Microsoft compatible Code Page 437
nft00932.mod — JIS Japanese
•
• nft00936.mod — GB2312 Chinese Simplified
• nft00949.mod — KSC5601 Korean
• nft00950.mod — Big 5 Traditional Chinese
6820 Series 80-Column Printer User Manual
Ignore this cable attached
to the printer mechanism
20.