Safety Precautions; Global Services And Support; Warranty Information - Intermec 6820 User Manual

Before You Begin

Safety Precautions

Global Services and Support

xiv
Read and review all warnings and cautions in this manual before
connecting the printer.
Moving parts are exposed when the cover is open. Make sure the
cover is closed before you operate the printer.
Do not put your fingers inside the print mechanism when the
power is on.
Ensure that dangerous conditions cannot occur under any
circumstances, even for a brief period of time.
Observe all safety and accident prevention regulations applicable
to your specific region and application.
Carefully read the warning text on the envelope before using a
cleaning card.
Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.
You must implement both hardware and software safety
precautions to prevent the possibility of undefined system states.
Risk of explosion if battery is replaced by an incorrect type. Use
of another battery may present a risk of fire or explosion.
The battery may present a fire or chemical burn hazard if
mistreated. Do not disassemble the battery, heat above 100 °C
(212 °F), or incinerate.
Dispose of any used batteries according to the instructions.

Warranty Information

To understand the warranty for your Intermec product, visit the
Intermec website at
Returns and Repairs > Warranty.
www.intermec.com
6820 Series 80-Column Printer User Manual
and click Support >