Clear Vertical Tabs; Set Vertical Tabs In Channel - Intermec 6820 User Manual

6820 Series 80-Column Printer User Manual
n1 is the first tab (range of values for tab stops is 1 to 255), n2 is the
second tab (all tabs must be in ascending order), ... are subsequent
tabs (maximum number of tabs: 16), nk is the last tab to set (any value
less than the previous tab value acts as a terminating character), NUL
is the terminating character. All tab settings with this function are
stored in channel 0.

Clear Vertical Tabs

Clears all vertical tab stops. This is a variant behavior of the Set
Vertical Tabs function, where the NUL acts as an early terminating
character.
Format
Decimal
27 66 0

Set Vertical Tabs in Channel

This function works the same as the Set Vertical Tabs function, except
that it stores the tabs into a specified channel, as specified by the
variable c. This channel is selected for use by the Select Vertical Tab
Channel function.
Format
Decimal
27 98 c n1 n2 .. nk 0 1B 62 c n1 n2 .. nk 00
c is the channel number (range is 0 to 7), n1 is the first tab (range of
values for tab stops is 1 to 255), n2 is the second tab (all tabs must be
in ascending order), ... are subsequent tabs (maximum number of tabs
is 16), nk is the last tab to set (any value less than the previous tab
value acts as a terminating character), and NUL is the terminating
character.
Chapter 4 — Control Code Definitions
Hex
1B 42 00
Hex
ASCII
ESC "B" NUL
ASCII
ESC "b" c n1 n2 .. nk NUL
57