Portable Printer; Media Specifications - Intermec 6820 User Manual

Appendix A — Specifications and Default Settings
Fixed Mount Printer Dimensions (continued)
Configuration (with deep paper tray)
with CN3 Series, CN70, or CN70e Holder Top Mount

Portable Printer

Portable Printer Dimensions
Configuration
with handle, 700 Series, or CK61 Holder Top Mount, and
Deep Paper Tray
with handle, 700 Series, or CK61 Holder Top Mount or
Fill Plate, and Shallow Paper Tray
with handle, CN3 Series, CN70, or CN70e, Holder Top
Mount, and Deep Paper Tray
with handle, CN3 Series, CN70, or CN70e, Holder Top
Mount or Fill Plate, and Shallow Paper Tray

Media Specifications

108
The portable printer may come with a handle, an AC foot, or with a
terminal holder top mount.
Using paper that matches the following specifications ensures
optimum 6820 performance. Variation from these specifications,
use of aged paper, or use of paper exposed to elements such as dirt
or humidity may cause printing problems.
The printer works with 1-3 ply carbonless paper that is single-edge
glued and designed for sprocket feed. Standard paper size is 8.5 x 11
inch or 241 x 305 mm international (8.5 x 12 in). Use 3-ply forms up
to a maximum of 0.23 mm (0.009 in) thick.
A soft, flexible, rubber type cement applied to one perforation strip
only is preferred. The paper should wrap around a 1 1/4 in diameter
roll without curl or wrinkle.
Width Length
36.8 cm 38.1 cm
(14.5 in) (15 in)
Width Length
38.1 cm 41.9 cm
(15.0 in) (16.5 in)
38.1 cm 41.9 cm
(15.0 in) (16.5 in)
38.1 cm 41.9 cm
(15.0 in) (16.5 in)
38.1 cm 41.9 cm
(15.0 in) (16.5 in)
6820 Series 80-Column Printer User Manual
Depth
20.3 cm
(8.0 in)
Depth
20.3 cm
(8.0 in)
13.0 cm
(5.1 in)
20.3 cm
(8.0 in)
13.0 cm
(5.1 in)