5
6
Removing the bezel assembly
To remove the bezel assembly:
1
2
3
20
CHAPTER 4: Installing Components
Swing the side panel away from the computer.
Lift the panel away from the server and place it out of the way.
Follow the instructions in
After removing the side panel, press the three black plastic tabs (positions indicated by
the arrows) to release the right side of the bezel.
Swing the right side of the bezel out until the left side of the bezel can be disengaged
from the left side of the computer, then remove the bezel.
"Opening the server case" on page
19.