Gateway E-9232T User Manual page 36

5
6
7
8
9
10
11
12
30
CHAPTER 4: Installing Components
Select the NV RAID Configuration sub-menu. The NV RAID Configuration sub-menu opens.
For the NV RAID Configuration option, click Enabled.
Select the SATA channels your hard drives are connected to and set them to Enabled.
Exit the BIOS Setup utility.
Restart your server. During the boot process you will see the following message:
Press F10. The RAID BIOS console opens.
Configure the RAID options, then exit the RAID BIOS console.
Reboot the server.