Me Recovery; Manufacture Mode Select - Supermicro B1SD1-TF User Manual

ME Recovery

Set P1-JPME1 to select ME Firmware
Recovery mode, which will limit system
resource for essential function use only
without putting restrictions on power
use. In the single operation mode, online
upgrade will be available via Recovery
mode. See the table on the right for pin
definitions.

Manufacture Mode Select

Set P1-JPME2 to bypass SPI flash se-
curity and force the system to use the
Manufacture Mode, which will allow the
user to flash the system firmware from
a host server to modify system settings.
See the table on the right for jumper
settings.
A
B
MAC CODE
MAC CODE
BAR CODE
P1-JBR1
P1-JPME1
P1-JPME2
CPU1
AST
2400
2-15
Chapter 2: Installation
ME Recovery
Jumper Settings
Pin # Definition
1-2 Normal (Default)
2-3 ME Recovery
ME Mode Select
Jumper Settings
Pin # Definition
1-2 Normal (Default)
2-3 Manufacture Mode
A. P1-JPME1 ME Recovery
B. P1-JPME2 Manufacture Mode