Me Recovery; Manufacture Mode Select - Supermicro B1SD2-TF User Manual

ME Recovery

Set P1-JPME1 (for Node 1) and P2-
JPME1 (for Node 2) to select ME Firm-
ware Recovery mode, which will limit
system resource for essential function
use only without putting restrictions on
power use. In the single operation mode,
online upgrade will be available via Re-
covery mode. See the table on the right
for pin definitions.

Manufacture Mode Select

Set P1-JPME2 (for Node 1) and P2-
JPME2 (for Node 2) to bypass SPI flash
security and force the system to use the
Manufacture Mode, which will allow the
user to flash the system firmware from
a host server to modify system settings.
See the table on the right for jumper
settings.
B
P1-JBR1
A P2-JBR1
P1-JPME2
P1-JPME1
P2-JPME2
P2-JPME1
D
C
J27
P2-JWD1
P2-JSD1
P1-JWD1
P2-SATA4
P2-BT1
P2-JBT1
CPU2
P1-SATA4
P1-BT1
P1-JSD1
P1-JBT1
CPU1
P1-JPG1
P2-JPG1
P1-JPB1
P2-JPB1
LEDM2
LEDM1
2-15
Chapter 2: Installation
ME Recovery
Jumper Settings
Pin # Definition
1-2 Normal (Default)
2-3 ME Recovery
ME Mode Select
Jumper Settings
Pin # Definition
1-2 Normal (Default)
2-3 Manufacture Mode
A. P1-JPME1 ME Recovery
B. P2-JPME1 ME Recovery
C. P1-JPME2 Manufacture Mode
D. P2-JPME2 Manufacture Mode