Table 20 Recommended Maintenance Schedule; Chapter 10: Printer Maintenance - Microcom 322M Operator's Manual

Chapter 10: Printer Maintenance

10.1 Maintenance Schedule
It is important to note that the optimum print quality and print head life is achieved by
maintaining a clean printer and print head. A Microcom Corporation approved cleaning kit
(part # 040005-0000) is available; contact your sales representative for purchasing
information.
AREA
Print head
Drive Roller
Peel Edge
Interior Cleaning
Exterior Cleaning
Table 20
CAUTION: Microcom Corporation will not be held responsible for
damage caused by any non-approved solvent, cleaning material and/or
method. The use of such non-approved materials and/or methods may
void appropriate expressed or implied warranties.
322M Operator's Manual
METHOD
Foam tipped swab, cotton tipped
swab, or thermal printer cleaning
card dampened with Isopropyl
Alcohol.
See section 10.4
Foam tipped swab, cotton tipped
swab, thermal printer cleaning
card, or lint-free cloth dampened
with Isopropyl Alcohol
See Section 10.5
Foam tipped swab, cotton tipped
swab, thermal printer cleaning
card, or lint-free cloth dampened
with Isopropyl Alcohol
See section 10.3
Compressed air, soft-bristle
brush, and/or lint-free cloth
dampened with Isopropyl Alcohol.
See section 10.3
Lint-free cloth dampened with a
mild, non-abrasive general
purpose cleaner.
See section 10.6
Recommended Maintenance Schedule
INTERVAL
After every roll of
media or every 512
feet of tag stock or
fanfold media.
After every roll of
media or every 512
feet of tag stock or
fanfold media.
As Needed.
As Needed.
As Needed.
89