Microcom 322M Operator's Manual page 104

Quick Reference Command Summary
^A ^D COMMAND
21 Software Switch #1: A non-volatile command used to set the various
functions identified below.
^AB12345678
*******.))) 1 = Enable XON/XOFF ; 0 = Disable
******.)))) 1 = 8 Data Bits ; 0 = 7 Data Bits
*****.))))) 1 = Enable Echo ; 0 = Disable
****.)))))) 1 = Disable Parity (NONE) ; 0 = Enable Parity
***.))))))) 1 = Odd Parity ; 0 = Even Parity
**.)))))))) 1 = Ignore Control Codes ; 0 = Accept
*.)))))))))),
.)))))))))),*
22 Software Switch #2: A non-volatile command used to set the various
functions identified below.
^AB12345678
*******.)))))))),
******.)))))))),*
*****.)))))))),**
*****
*****
*****
*****
*****
*****
*****
*****
*****
*****
****.))))))))) 1 = Use Saved Format File ; 0 = ROM Format
***.)))))))))) 1 = Enable Print Button ; 0 = Disable
**.))))))))))) 1 = Disable Button ; 0 = Enable
*.)))))))))))) 1 = Enable >RESTARTED< Response ; 0 = Disable
.))))))))))))) 1 = Enable Clear Text ; 0 = Disable
100
**
Enquiry Responses
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent
***
Power-up Label Formats
000 = No Power-up Format
001 = ROM or Saved Format File 1
010 = ROM or Saved Format File 2
011 = ROM or Saved Format File 3
100 = ROM or Saved Format File 4
101 = ROM or Saved Format File 5
110 = ROM or Saved Format File 6
111 = ROM or Saved Format File 7
Appendix C
322M Operator's Manual