Table 12 Fo & Fj Character Starting Positions; Fo (Field Orientation); Fj (Field Justification); Cmx (Character Multiplier X Direction) - Microcom 322M Operator's Manual

Designing Labels Using LDS
5.6.7 FO (Field Orientation)
This parameter defines the rotation of the format field on the label. The point of rotation is
determined from the Field Justification parameter.
0
1
2
3
5.6.8 FJ (Field Justification)
This parameter defines the justification of the format field on the label.
0
1
2
3
4
5
Table 12 shows how to obtain the proper character placement or starting positions relative
to the format field's orientations and justifications.
ROTATION
0 & 180 Degrees
90 & 270 Degrees
Table 12
5.6.9 CMX (Character Multiplier X Direction)
The CMX parameter multiplies each character in the X direction. The valid range is 1 to
65536. For bar codes with a FO of 0 & 180 degree rotation, the CMX would be the
multiplier while the CMY would be the actual height in thermal dots. For bar codes with a
36
0 degrees (normal rotation)
180 degrees (upside-down rotation)
90 degrees (left rotation)
270 degrees (right rotation)
Left Justified above the base-line
Right Justified above the base-line
Left Justified below the base-line
Right Justified below the base-line
Centered above the base-line
Centered below the base-line
FIELD ORIENTATION and JUSTIFICATION
0 – Left justified above the base-line
1 – Right justified above the base-line
2 – Left justified below the base-line
3 – Right justified below the base-line
4 – Centered above the base-line
5 – Centered below the base-line
0 – Left justified above the base-line
1 – Right justified above the base-line
2 – Left justified below the base-line
3 – Right justified below the base-line
4 – Centered on the Y axis, right of X coordinate
5 – Centered on the Y axis, left of the X coordinate
FO & FJ Character Starting Positions
Chapter 5
322M Operator's Manual