Table 18 Ucc/Ean Application Identifiers - Microcom 322M Operator's Manual

Chapter 9
AI
8001
8002
UPC/EAN Number and Serial Number of Returnable
8003
Coupon Extended Code – Number System Character
8100
Coupon Extended Code – Number System Character ,
8101
Coupon Extended Code – Number System Character
8102
Mutually Agreed, Between Trading Partners or FACT
90
91
92
93
94
95
96
97
98
99
Each subfield's format is expressed as the format of the Application Identifier number + the
format of the associated data. Each subfield must adhere to the format specified or else the
printer will be unable to locate following subfields, causing errors generating the bar code.
Any variable length subfield, unless it is the last subfield in the field, must be terminated by
the two characters "#6" (pound+6). These characters are translated as the Code 128
"FNC1" character, which is specified by the UCC/EAN 128 symbologies variable-length field
terminator. The characters "#6" are only used internally and are not printed.
Several Application Identifiers (00, 01, 22, and 8003) specify fields that will have a check
digit as part of their data. A character must be included in the check digit place (although it
need not be the correct check digit). This character is used as a placeholder and will not be
printed. The printer will calculate the correct check digit and replace the character already
there.
322M Operator's Manual
Content
Roll Products – Width Length, Core Diameter,
Direction, and Splices
Electronic Serial Number for Cellular Mobile
Telephones
Asset
and Offer
Offer, and End of Offer
preceded by zero
Intra-Company (Internal)
Intra-Company (Internal)
Intra-Company (Internal)
Intra-Company (Internal)
Internal-Carriers
Internal-Carriers
Intra-Company (Internal)
Intra-Company (Internal)
Internal
Table 18 UCC/EAN Application Identifiers
Dis
Bar Codes
Format
n4+n14
n4+an..20
n4+n14+an..16
n4+n1+n5
n4+n1+n5+n4
n4+n1+n1
n2+an..30
n2+an..30
n2+an..30
n2+an..30
n2+an..30
n2+an..30
n2+an..30
n2+an..30
n2+an..30
n2+an..30
85