This programme is for demonstration
Demo with sound
This programme activates the pumps
to demonstrate the sound of the
The door will open automatically.
To switch Demo mode on
^ Select the option you want.
and confirm with the
middle of the three buttons beside
^ Close the door.
Demo mode will begin.
To switch Demo mode off
Demo mode will switch off automatically
when it reaches the end of the cycle.
If you have altered any settings from
the factory default, you can reset them
back to the factory default settings.
Reset to default
your selection with the middle of the
three buttons beside the display.
To close the Settings menu
to come out of the Settings
and confirm your
selection with the middle of the three
buttons beside the display.
The display will then show the last
programme selected and the indicator
light for the programme selected will