Download Print this page

Replenish Salt And Rinse Aid Reminders; Soak; Pre-Wash - Miele 09 276 830 Operating Instructions Manual

Hide thumbs

Advertisement

Settings menu
If you only use combination
products containing salt and rinse
aid in your dishwasher, you can
switch off the reminders to replenish
salt and rinse aid so that the
dishwasher will go into Standby
despite a lack of salt or rinse aid
(see "Before using for the first time").
You cannot switch off fault
messages.
Replenish salt and rinse aid
reminders
If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can switch
both of these reminders off if you wish.
The DetergentAgent function will not be
affected by this.
^ Select the setting you want, and
confirm your selection with the
middle of the three buttons beside
the display.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the reminders back on.
72

Soak

You can use the Soak function in the
programme selected for loosening very
stubborn food residues from pots, pans
and casserole dishes. It is not available
for every programme.
If you are using powder dishwasher
detergent, add approx. 5 g to
compartment I.
^ Select the setting you want, and
confirm your selection with the
middle of the three buttons beside
the display.
Once set, the function will remain active
for the programmes for which it is
available, until the setting is changed.

Pre-wash

You can use the Pre-wash function in
the programme selected to remove
easily loosened food residues. It is not
available for every programme.
^ Select the setting you want, and
confirm your selection with the
middle of the three buttons beside
the display.
Once set, the function will remain active
for the programmes for which it is
available, until the setting is changed.

Advertisement

loading

This manual is also suitable for:

G5680G5685