Optimise standby
The dishwasher is supplied with the
Optimise standby
function set as
standard.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button is pressed or
after the end of a programme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off
automatically increases to approx. 6
hours. Doing this will increase energy
consumption.
Select the setting you want and
confirm with OK.
BrilliantLight
The dishwasher is fitted with interior
lighting.
When the door is open, the lighting
switches off automatically after 15
minutes.
You can also switch off the interior
lighting permanently.
Select the setting you want and
confirm with OK.
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
Confirm the display with OK.
Showroom programme
For demonstration purposes only.
The dishwasher is equipped with
various demo programmes for
showroom use.
-
Demo mode
Demonstration programme for
showrooms
-
Demo with sound
This programme activates the
circulation pump to demonstrate the
sound of the dishwasher.
-
Demo AutoOpen
The door will open automatically.
-
Cont. BrilliantLight
The interior lighting is on constantly.
Settings menu
91