Display Indicators - Fluke PM2811 User Manual

4 - 6
4.2.2

Display indicators

In the OPERATE mode, the display can show up to 16 characters, which are
refreshed four times per second.
On the front plate just below the display, a number of status abbreviations, e.g.,
CV (Constant Voltage), have been placed. Above each status abbreviation an
annunciator ( sign) can be displayed to indicate the validity of the corresponding
W
status abbreviation.
The enabled output channels (1 to 3) in the OPERATE mode plus the REM and
SRQ status abbreviations can also be displayed.
Example of a voltage setting (V
selected output channel
1 V S
ENABLED 1 2 3
Note: The output channel indication is displayed only for multiple output
channel models.
Example of readback data for output channel 2:
selected output channel
2
ENABLED 1 2 3
Note: The output channel indication is displayed only for multiple output
channel models.
) for output channel 1:
set
selected function
E T
STEP FLT CV CC OCP
readback voltage
5 . 0 3
STEP FLT CV CC OCP
1 .
W W
EN
V 0 .
W W
EN
Users Manual
set value
2 3 4 V
REM SRQ
readback current
2 6 3 A
REM SRQ