Fluke PM2811 User Manual page 38

3 - 10
n = 1, 2, or 3: CPU error of output channel 1, 2, or 3
DECIMAL
128
64
32
16
8
4
2
1
If the display is correct, character # will be displayed on the 16 character
positions. Also the text (ENABLED 1 2 3 4 5 6 7
be displayed for 1 second.
# # # #
ENABLED 1 2 3
Next, the text I N I T I A L I Z I N G will be displayed for 1 second. If the mode after
power on is OPERATE, the readback voltage and current will be displayed if the
output is not DISABLED.
If not in OPERATE mode, the display shows STANDBY.
If a failure occurs during one of the tests, inform your FLUKE Sales and Service
Center so that repair or replacement of the instrument can be arranged.
These tests take a few seconds to run. The instrument will be ready for use when
the message STANDBY or the readback voltage and current appears on the
display.
ERROR DESCRIPTION
Not used.
ROM checksum error.
Configuration checksum error.
Calibration checksum error.
Checksum error of the default settings.
Processor timer failure.
Not used.
Output channel not responding.
# # # #
t t
4 5 6 7
t t t t t t
# # # #
t t t t
Users Manual
REM SRQ) will
# # # #
REM SRQ