Table of Contents
Advertisement
SD CARD USE AND DATAbASES
The G1000 System uses Secure Digital (SD) cards to load and store various types of data. For basic flight
operations, SD cards are required for database storage as well as Jeppesen aviation and ChartView database
updates.
Do not load Jeppesen navigation data (except ChartView) onto Garmin Supplemental Data
CAUTION:
Cards.
JEPPESEN DATAbASES
The Jeppesen aviation database is updated on a 28-day cycle. The optional ChartView database is updated
on a 14-day cycle. If the ChartView database is not updated within 70 days of the expiration date, ChartView
no longer functions.
Both these databases are provided directly from Jeppesen. The ChartView database should be copied to the
Garmin supplied Supplemental Data Card which resides in the bottom card slot on the MFD. The aviation
database must be installed from the Jeppesen or user supplied SD data card. Contact Jeppesen (www.jeppesen.
com) for subscription and update information.
After the aviation database is installed, the card may be removed.
NOTE:
Updating the Jeppesen aviation database:
1) With the G1000 System OFF, insert the SD card containing the aviation database update into the top card slot
of the PFD to be updated (label of SD card should face left).
2) Turn the G1000 System ON. A prompt similar to the following is displayed in the upper left corner of the PFD:
3) Press the ENT Key to start the database update. A prompt similar to the following is displayed:
190-00592-06 Rev. A
Figure B-1 Database Update Prompt
Figure B-2 Database Update Confirmation
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
APPENDIX b
499
Advertisement
Table of Contents
