Table of Contents
Advertisement
ALTITUDE DISPLAY
Changing the altitude display mode:
1) On the Traffic Page, press the ALT MODE Softkey.
2) Press one of the following Softkeys:
•
BELOW
NORMAL
•
ABOVE
•
•
UNREST (unrestricted)
3) To return to the Traffic Page, press the BACK Softkey.
Or :
1) Press the MENU Key.
2) Turn the small FMS Knob to select one of the following:
BELOW
•
NORMAL
•
ABOVE
•
•
UNREST (unrestricted)
3) Press the ENT Softkey.
TRAFFIC MAP PAGE DISPLAY RANGE
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob from 2 to 24 nm, as indicated by the map range rings.
Changing the display range on the Traffic Page:
1) Turn the RANGE Knob.
2) The following range options are available:
•
2 nm
•
2 and 6 nm
6 and 12 nm
•
•
12 and 24 nm
The Navigation Map Page Setup Menu also controls the display of traffic. The setup menu controls the map
range settings. Traffic data symbols and labels can be decluttered from the display. If a map range larger than
the map range setting is selected, the data is removed from the map. Maps besides the Traffic Map Page use
settings based on those selected for the Navigation Map Page.
190-00592-06 Rev. A
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
HAZARD AVOIDANCE
351
Advertisement
Table of Contents
