Table of Contents
Advertisement
FLIGHT MANAGEMENT
Entering a VNV altitude and along-track offset for the waypoint:
1) Press the Direct-to Key to display the Direct-to Window.
2) Turn the large FMS Knob to place the cursor over the 'VNV' altitude field.
3) Enter the desired altitude.
4) Press the ENT Key. The option to select MSL or AGL is now displayed.
5) Turn the small FMS Knob to select 'MSL' or 'AGL'.
6) Press the ENT Key. The cursor is now flashing in the VNV offset distance field.
7) Enter the desired distance along-track before (-) or after (+) the offset waypoint.
8) Press the ENT Key. The 'Activate?' field is highlighted.
9) Press the ENT Key to activate.
Removing a VNV altitude constraint:
1) Press the Direct-to Key to display the Direct-to Window.
2) Press the MENU Key.
3) With 'Clear Vertical Constraints' highlighted, press the ENT Key.
188
Figure 5-53 Direct-to Window - Clearing Vertical Constraints
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Page Menu
- Clear Vertical Navigation
Constraints
190-00592-06 Rev. A
Advertisement
Table of Contents
