Wind Vector - Garmin Diamond DA40 Pilot's Manual

Integrated flight deck for da40 diamond star
Hide thumbs Also See for Diamond DA40:
Table of Contents

Advertisement

FLIGHT MANAGEMENT
Wind Vector On/Off
Nav Range Ring On/Off
Figure 5-25 Navigation Map Setup Menu -TRACK VECTOR, WIND VECTOR, NAV RANGE RING, FUEL RANGE RING Setup

WIND VECTOR

The map displays a wind vector arrow in the upper right-hand portion of the screen. Wind vector information
is displayed as a white arrow pointing in the direction in which the wind is moving for wind speeds greater than
or equal to 1 kt.
Wind Direction
The wind vector is not displayed until the aircraft is moving. It is not displayed on the Waypoint
NOTE:
Information pages.
Displaying/removing the wind vector:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'WIND VECTOR' field.
6) Select 'On' or 'Off'.
7) Press the FMS Knob to return to the Navigation Map Page.
156
Figure 5-26 Navigation Map - Wind Vector
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Track Vector
- On/Off
- Look Ahead Time
Fuel Range
- On/Off
- Fuel Reserve Time
Wind Speed
190-00592-06 Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamond da40fG1000

Table of Contents