Secure Digital (Sd) Cards - Garmin Diamond DA40 Pilot's Manual

Integrated flight deck for da40 diamond star

Hide thumbs Also See for Diamond DA40:

Table of Contents

1.2 SECURE DIGITAL (SD) CARDS

Ensure the G1000 System is powered off before inserting an SD card.

Refer to Appendix B for instructions on updating databases.

The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the upper right side of the

display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for aviation database

and system software updates as well as terrain database storage.

Ins talling an SD card:

1) Insert the SD card in the SD card slot, pushing the card in until the spring latch engages. The front of the card

should remain flush with the face of the display bezel.

2) To eject the card, gently press on the SD card to release the spring latch.

190-00592-06 Rev. A

SD Card Slots

Figure 1-3 Display Bezel SD Card Slots

Garmin G1000 Pilot's Guide for the Diamond DA40/40F

SYSTEM OVERVIEW

Diamond da40f G1000