Table of Contents
Advertisement
AUDIO PANEL AND CNS
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key (Figures 4-9, 4-10, and 4-11).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the
appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-11).
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Turn the FMS
Knob to Scroll
Through a List
of Frequencies
Or :
1) Press the MENU Key to display the page menu.
2) Turn the large FMS Knob to scroll through the menu options.
3) Press the ENT Key to place the cursor on the desired selection.
4) Scroll through the frequency selections with the FMS Knob or the ENT Key.
5) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
6) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Nearest Airports Menu
100
Press the ENT Key to
Load a Highlighted
Frequency into
the COM Standby
Frequency Box
Figure 4-9 Frequency Auto-Tuning from the MFD
Nearest Frequencies Menu
Figure 4-10 Nearest Pages Menus
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Nearest Airspaces Menu
190-00592-06 Rev. A
Advertisement
Table of Contents
