Table of Contents
Advertisement
SYSTEM OVERVIEW
• PFD
SYN VIS
PATHWAY
SYN TERR
HRZN HDG Displays compass heading along the Zero-Pitch line
APTSIGNS
DFLTS
WIND
OPTN1
OPTN2
OPTN3
OFF
DME
BRG1
HSI FMT
360 HSI
ARC HSI
BRG2
ALT UNIT
METERS
IN
HPA
STD BARO
• OBS
• CDI
• ADF/DME
22
Displays second-level softkeys for additional PFD configuration
Displays the softkeys for enabling or disabling Synthetic Vision features
Displays rectangular boxes representing the horizontal and vertical flight path
of the active flight plan
Enables synthetic terrain depiction
Displays position markers for airports within approximately 15 nm of the
current aircraft position. Airport identifiers are displayed when the airport is
within approximately 9 nm.
Resets PFD to default settings, including changing units to standard
Displays softkeys to select and configure wind data
Displays wind data in longitudinal and lateral components
Displays wind data total direction and speed
Displays wind data total direction with head and cross-wind speed components
Removes wind information from display
Displays/removes DME Information Window (optional)
Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
Displays softkeys to select the HSI format
Displays HSI as a 360° compass rose
Displays HSI as a 140° viewable arc (Bearing Information windows unavailable)
Cycles the Bearing 2 Information Window through:
NAV2: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
Displays softkeys for changing the Altimeter barometric setting and altitude displays to
metric units
Displays the current and Selected altitudes in meters in addition to feet, when selected
Displays the Altimeter barometric setting in inches of mercury (in Hg)
Displays the Altimeter barometric setting in hectopascals (hPa)
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric display is selected)
Selects OBS Mode on the CDI when navigating by GPS (only available with active leg)
Cycles CDI through GPS, NAV1 (VOR/LOC), and NAV2 (VOR/LOC) navigation sources
Displays/removes ADF/DME Radio Tuning Window (optional; may appear as ADF, DME,
or ADF/DME depending on installation)
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
190-00592-06 Rev. A
Advertisement
Table of Contents
