Navigation Status Box - Garmin Diamond DA40 Pilot's Manual

NAVIGATION STATUS bOX

The Navigation Status Box located at the top of the PFD contains two fields displaying the following
information:
• Active flight plan leg (e.g., 'D-> KICT' or 'KIXD -
> KCOS') or flight plan annunciations (e.g., 'Turn
right to 021˚ in 8 seconds')
• Distance (DIS) and Bearing (BRG) to the next
waypoint or flight plan annunciations (e.g., 'TOD
within 1 minute')
The symbols used in the PFD status bar are:
Symbol Description
Active Leg
Direct-to
Right Procedure Turn
Left Procedure Turn
Right Holding Pattern
Left Holding Pattern
Vector to Final
Right DME Arc
Left DME Arc
The navigation information displayed in the four data fields can be selected on the MFD Data Bar Fields Box
on the AUX - System Setup Page. The default selections (in order left to right) are GS, DTK, TRK, and ETE.
Changing a field in the MFD Navigation Status Box:
1) Select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the desired field number in the MFD Data Bar Fields Box.
190-00592-06 Rev. A
PFD Navigation Status Box
MFD Navigation Status Box
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
FLIGHT MANAGEMENT
The Navigation Status Box located at the top of the
MFD contains four data fields, each displaying one of
the following items:
• Bearing (BRG)
• Distance (DIS)
• Desired Track (DTK)
• Enroute Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time Enroute (ETE)
• Ground Speed (GS)
• Minimum Safe Altitude (MSA)
• True Air Speed (TAS)
• Track Angle Error (TKE)
• Track (TRK)
• Vertical Speed Required (VSR)
• Crosstrack Error (XTK)
133