Abnormal Operations; Abnormal Gps Conditions - Garmin Diamond DA40 Pilot's Manual

Integrated flight deck for da40 diamond star
Hide thumbs Also See for Diamond DA40:
Table of Contents

Advertisement

FLIGHT INSTRUMENTS

2.4 AbNORMAL OPERATIONS

AbNORMAL GPS CONDITIONS

The annunciations listed in the table can appear on the HSI when abnormal GPS conditions occur. Refer to
the Flight Management Section for more information on Dead Reckoning (DR) Mode.
Annunciation
LOI
INTEG OK
DR
In DR Mode the CDI is removed from the display when GPS is the selected navigation source. In addition, all
GPS-derived data is computed based upon an estimated position and is displayed as yellow text on the display
to denote degraded navigation source information. This data includes the following:
• Navigation Status Box fields except Active Leg, TAS, and DTK
• GPS Bearing Pointer
• Wind data and pointers in the Wind Data Box on the PFD
• Track Indicator
• All Bearing Pointer Distances
• Active Flight Plan distances, bearings, and ETE values
These items should be verified when operating in Dead Reckoning Mode.
Also, while the G1000 is in DR Mode, the autopilot will not couple to GPS, and Terrain Proximity, TERRAIN-
SVS, and TAWS are disabled. Additionally, the accuracy of all nearest information (airports, airspaces, and
waypoints) is questionable. Finally, airspace alerts continue to function, but with degraded accuracy.
74
Location
Lower left of
Loss of Integrity Monitoring–GPS integrity is insufficient for the current
aircraft symbol
phase of flight
Lower left of
Integrity OK–GPS integrity has been restored to within normal limits
aircraft symbol
(annunciation displayed for 5 seconds)
Upper right of
aircraft symbol
Dead Reckoning–System is using projected position rather than GPS position
and PFD Inset
to compute navigation data and sequence active flight plan waypoints
Map
Table 2-3 Abnormal GPS Conditions Annunciated on HSI
Figure 2-42 Example HSI Annunciations
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Description
190-00592-06 Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamond da40fG1000

Table of Contents