On the WPT - Airport Information Page, the cursor can be placed on the frequency field by pressing the
FMS Knob and scrolling through the list. The frequency is transferred to the COM Standby Field with the
ENT Key.
190-00592-06 Rev. A
Figure 4-11 WPT – Airport Information Page
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
AUDIO PANEL AND CNS
Press Frequency
Transfer Key to Load
Frequency into COM
Active Frequency Field
Selected Airport
Identifier and
Information
Runway
Information
Press ENT Key to Load
Frequency into COM
Standby Field. Cursor
then Advances to
Next Frequency.
Press INFO Softkey for
AIRPORT, RUNWAYS,
and FREQUENCIES
Windows
101